Veneer Me

Shadeguides - Suggestions - Products - Indirect posteriors - Indirect anteriors
3 Oct 2017

A unique device for maximum security for your veneers and onlays during cementation and transportation. Thanks to veneerME, you’ll be able to carry, ship and also manipulate your hyper-delicate veneers, inlays, onlays, crowns and overlays in the highest conditions of security.

The most awaited product, VeneerME from Galip Gurel's concept in collaboration with Smile Line and Styleitaliano.

Fig. 1

For Clinicians etch, dry, silanize, ultrasonic bath (do not use alcohols with concentrations over 50%), dry again, apply bonding and your cement of choice in full security. For technicians, ship the veneers from the laboratory in the most secure coditions, add value to your precious work, and re-use it.

Fig. 2

The sticky polyurethane gel-pad: The base of veneerME box is covered with a sticky pad out of polyurethane gel. Veneers are placed on this pad on their buccal surface, and adhere naturally. All the preparation process of the internal part of the veneer (acid etching, silanization) can be done in this position without any fear of a veneer escaping or falling on the floor. The pad’s material is super resistant and can be re-used several times (it is easily replaceable in case of deterioration).

Fig. 3

The security membrane-frame: Once the veneers are secured on the pad, the membrane-frame is clipped on the base of veneerME box for extra fixation. The xx-thin membrane, made out of nylon, delicately adapts to the shape of the veneers. With this done, you just need to close the lid and your master work is ready for delivery. The membrane-frame can be replaced -if needed- after having been used several times.

Fig. 4

Huge advantage: The membrane is permeable! In other words the clinician can proceed with rinsing and drying after having replaced the membrane-frame on the base. This way the clinician can work in the best conditions and in total security.

Fig. 5

Acid etching can be performed while veneers are temporarily fixed in the sticky pad, wait the time requested by the porcelain manufacturer and clip the membrane frame.

Fig. 6

Wash the acid, even under the tap.

Fig. 7

Rinse, dry and continue with all your bonding steps in the same way.

Fig. 8

The sticky pad provides a mild hold of the Veneers, allowing to keep them in place when blowing air delicately, avoiding accidental falling of the Veneers during the procedure. For more agressive procedures, the membrane can be placed for extra security. And for transportation, close the lid for perfect protection.

Fig. 9

VeneerME box, is the perfect present for your Dentist. VeneerME box is the perfect present for your Lab Technician.

Fig. 10

VeneerME comes in a set of 3 complete containers with 3 spare Polyurethane sticky pads and 3 spare membrane frames. Additionally packs of 10 Replacement Membrane frames or packs of 10 Replacement Polyurethane sticky pads can be purchased.
Available with your local Smile Line dealer or in www.smileline-by-styleitaliano.com

Fig. 11
 

Bibliography