Small and Big Restoration: Bulk and Body Solution

When performing restorative dentistry and aiming to optimize chair time while reducing patient stress, it is essential to minimize the number of appointments by treating the entire area comprehensively and following effective protocols to decrease operating time. This is the goal of restorative dentistry!

styleitaliano style italiano teeth before amalgam removal bulk and body technique direct posterior restorations

Fig.1
This simple, everyday case shows three amalgam restorations that need to be removed due to aesthetic concerns and small cracks, but without any symptoms. The first step is to take a photograph to document the current situation, including the volume of the teeth, their anatomy, and the inclination of the cusps. It is always mandatory to take a photograph before working on the teeth.

styleitaliano style italiano rubber dam isolation prior to amalgam removal bulk and body technique direct posterior restorations

Fig.2
After that, you must perform field isolation to ensure all the amalgam is properly collected.

styleitaliano style italiano cavities before and after cleaning bulk and body technique direct posterior restorations

Fig.3
Wooden wedges are positioned where the marginal ridge needs to be restored, even if the contact point does not need to be removed, such as for the distal wall of the first molar. After verifying the integrity of the healthy enamel, we can proceed with the adhesive restoration protocol.

styleitaliano style italiano selective enamel etching bulk and body technique direct posterior restorations

Fig.4
The first step is selective enamel etching.

bonding of cavities

Fig.5
After etching, it is important to position the matrices to recreate the walls. For the distal wall of the first molar, the Polydentia matrix is held in place by compacted dental Teflon tape. The universal adhesive system is then applied over the entire surface by brushing for about 20 seconds.

lining deep cavities

Fig.6
After shaping the walls, a flowable composite is applied to the bottom of the cavities. Its universal color and fluidity help the dentist quickly achieve the first composite layer without incorporating bubbles.

modeled composite restorations before staining

Fig.7
You can reproduce the anatomy of the teeth, cusp by cusp. The cavity on the second upper molar was very small. In this case, a single mass and the Espresso Posterior Technique were used for modeling.
For the first upper molar, more increments were necessary to achieve the correct morphology, but the same composite works perfectly. You can start with the mesio-buccal cusp, followed by the disto-buccal, disto-palatal, and mesio-palatal cusps. Eventually, accessory cusps can be shaped. The same process applies to the first premolar: shape the buccal and palatal cusps first, then the accessory cusps.
This composite is very easy to handle, manage, and polish; as you can see in this picture, just after polymerization, the restoration already appears polished.

styleitaliano style italiano stained composite restorations bulk and body technique direct posterior restorations

Fig.8
This is an optional step: you can stain the sulci, similar to the adjacent teeth, to enhance the 3D appearance.

styleitaliano style italiano composite restorations after rubber dam removal bulk and body technique direct posterior restorations

Fig.9
Final restoration after polishing.

styleitaliano style italiano occlusal check of composite restorations bulk and body technique direct posterior restorations

Fig.10
Occlusal check.

Conclusions

Optimizing chair time benefits both patients and practitioners. You must always have a clear plan of what you want to accomplish. Managing two, three, or even four fillings simultaneously requires effective adhesion and modeling protocols, along with the right materials to achieve aesthetic results. For posterior teeth, in particular, it is essential to choose a composite that is stable, easy to shape, easy to polish, and easy to blend with the surrounding tooth structure.

Bibliography

  1. Manauta J, Salat A, Devoto W, Putignano A. LAYERS 2. Direct composites: the StyleItaliano clinical secrets. 2023 Quintessence publishing.
  2. Poitevin A, De Munck J, Van Ende A, Suyama Y, Mine A, Peumans M, Van Meerbeek B. Bonding effectiveness of self-adhesive composites to dentin and enamel. Dental Materials. 2013 Feb;29(2):221-30.
  3. Saegusa M, Kurokawa H, Takahashi N, Takamizawa T, Ishii R, Shiratsuchi K, Miyazaki M. Evaluation of Color-matching Ability of a Structural Colored Resin Composite. Oper Dent. 2021 May 1;46(3):306-315. doi: 10.2341/20-002-L. PMID: 34411249.
  4. Alqabas AA, Mously HA, Alkhurays MA, Alhumaidan HJ, Alnassar AS. The effect of gravity on marginal integrity of different flowable bulk-fill resin composites. Medicina. 2024 Feb;60(2):230
  5. Bourgi R, Hardan L, Cuevas-Suárez CE, Devoto W, Kassis C, Kharma K, Harouny R, Ashi T, Mancino D, Kharouf N, et al. Effectiveness of Different Application Modalities on the Bond Performance of Four Polymeric Adhesive Systems to Dentin. Polymers2023,15,3924.
  6. Essential Lines. Chiodera G. 2018. www.styleitaliano.org

RELATED CASES

post-orthodontic diastema closure restoration

Post-Orthodontic Diastema Closure with Direct Composite Restorations

Dr. Brunelli presents a conservative approach to post-orthodontic diastema closure, showing how a wax-up-guided silicone index and a single-shade composite can simplify direct restorations from canine to canine