Single central composite with simplified shades and shapes improvement

A clinical case by our Community member Dr Laura Mokhtari

This article and its content are published under the Author’s responsibility as an expression of the Author’s own ideas and practice. Styleitaliano denies any responsibility about the visual and written content of this work.

This article focuses on the process of direct composite rehabilitation, emphasizing the importance of aesthetic analysis in planning successful restorations. It explores key factors such as shade selection, the shaping of composite materials, and techniques that ensure seamless integration with adjacent teeth. The role of maintaining a clean operative field is also discussed, along with the significance of polishing and finishing procedures, which contribute to both immediate and long-term aesthetic outcomes. Through this exploration, the aim is to highlight best practices for achieving natural, durable results in restorative dentistry.

styleitaliano style italiano initial situation Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.1
The patient visited the clinic seeking to replace an old composite restoration on tooth 1.1 and to address a gap on the mesial side of tooth 2.1. She expressed dissatisfaction with the shape and color of the current composite.

styleitaliano style italiano improper color Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.2
The restoration on tooth 1.1 does not harmonize in color with the natural tooth structure. Additionally, there is a notable deficiency of material on the mesial angle of tooth 2.1.

styleitaliano style italiano Frontal and lateral views of the initial situation Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.3
Frontal and lateral views of the composite.

styleitaliano style italiano Shade selection Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.4
At the start of the composite bonding session, the composite shade is selected before isolating the operative field to prevent dehydration-induced changes in tooth shade. Simplified composite shade systems allow for the use of a single shade in the restoration. In this case, the shades LIGHT and BLEACH were tested, and LIGHT was chosen for the procedure.

styleitaliano style italiano isolation Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.5
The operative field is prepared using a thick rubber dam. Although the focus is on teeth 2.1 and 1.1, a plural dam is applied, isolating all six anterior teeth. This broader setup provides the operator with a comprehensive view, ensuring better symmetry and proportionality during the procedure.

styleitaliano style italiano Protection of the adjacent teeth Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.6
Protecting adjacent teeth is essential during treatment to prevent the composite material from unintentionally bonding to them. This step ensures precision and maintains the integrity of the neighboring teeth throughout the procedure.

styleitaliano style italiano Old composite removal Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.7
The old composite is carefully removed, and a chamfer is created along the margins of the previous restoration. This chamfer facilitates seamless light transition and ensures the new composite matches the natural tooth shade, enhancing the overall aesthetic outcome.

etching single central incisor

Fig.8
The tooth surface is prepared by applying 35% orthophosphoric acid. Enamel is etched for 20 seconds, and dentin for 15 seconds. This process creates a suitable micro-retentive surface for optimal adhesive bonding.

bonding single central incisor

Fig.9
The adhesive is applied using a microbrush, gently rubbing it onto the surface for 20 seconds to ensure thorough penetration. The adhesive is then air-dried until the film stabilizes and no longer shifts, followed by polymerization with light curing for 10 seconds to secure the bonding layer.

styleitaliano style italiano palatal wall Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.10
The palatal wall is recreated with a silicone index made with the previous restoration.

styleitaliano style italiano composite placement Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.11
The restoration of tooth 2.1 involves recreating the medial angle using composite.

styleitaliano style italiano Palatal shell Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.12
In the close-up view of the palatal shell, the form appears irregular, with the primary goal being to provide a pattern for the composite build-up. A simplified light-shade composite is used for this purpose.

styleitaliano style italiano Blue composite Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.13
Initial observation revealed an opalescent zone on the incisal edge of tooth 2.1. To replicate this effect, a small amount of composite is applied to mimic the natural opalescence.

styleitaliano style italiano After application of a small amount of blue composite Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.14
After the application of a small amount of composite, the opalescent effect on the incisal edge of tooth 2.1 is successfully mimicked, enhancing the natural appearance of the restoration.

styleitaliano style italiano Composite build-up Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.15
The build-up is performed using a light composite shade, with the assistance of LM Arte instruments, a pencil, and a microbrush. The dental brush plays a crucial role in ensuring the composite gently embraces the surface of the tooth, helping to avoid irregularities and air bubbles, and creating a smooth, seamless restoration.

styleitaliano style italiano Composite build-up Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.16
The composite build-up is complete, and the shape is accurate. However, finishing and polishing are essential steps to achieve a more natural result, refining the contours and surface texture for a seamless integration with the surrounding tooth structure.

finishing composite restoration

Fig.17
The finishing of the composite begins with the use of pop-on discs on the incisal edge and buccal area of the tooth to refine the shape and smooth out any imperfections. Next, the polishing kit is employed. The first step in this process is to use the pink pre-polisher to polish the buccal surface, enhancing the reliefs and creating a smooth, lustrous finish that mimics the natural contours of the tooth.

styleitaliano style italiano polishing Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.18
The polishing process concludes with high-gloss polishing, ensuring a smooth and shiny finish on the restoration. This step is crucial for achieving a natural, lifelike appearance. Once the high-gloss polish is applied, the operative field is removed, and the restoration is complete.

styleitaliano style italiano Immediate post-op result Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration

Fig.19
The immediate post-operative result after polishing and removing the operative field is satisfying, with the restoration closely resembling the natural tooth. However, it is important to note that the final appearance may slightly change as the tooth rehydrates, and further adjustments may be needed once rehydration occurs.

styleitaliano style italiano Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration Final result at 1 month

Fig.20
One month after the procedure, the final result is highly satisfying. The patient is pleased with her new smile, and the composite integration appears seamless. The use of simplified composite shades has contributed to a quick and effective result, ensuring both aesthetic satisfaction and functional success.

styleitaliano style italiano Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration Final result at 1 month

Fig.21
One month after the procedure, the final result is excellent. The patient is delighted with her new smile, and the composite integration is flawless.

styleitaliano style italiano Single central composite with simplified shades and shapes improvement composite shades Kulzer Venus Pure composite direct restoration composite restoration Before and after treatment

Fig.22
Before and after treatment.

Conclusions

An initial aesthetic analysis is crucial for planning a direct composite rehabilitation. The shape of the composite restoration is the second key parameter in achieving a natural result.

Maintaining a clean operative field is critical for achieving an optimal aesthetic outcome. Additionally, proper polishing and finishing are essential for both immediate satisfaction and long-lasting results, ensuring the restoration remains functional and visually appealing over time.

Bibliography

  1. Devoto W.Clinical Procedure for producing aesthetic stratified composite resin restorations. Pract Proced Aesthete Dent 2002, 14:541-543.
  2. DIestchi D. Free-hand bonding in the aesthetic treatment of anterior teeth : creating the illusion. J Esthet Dent 1997;9:156-164.
  3. Frank AC. Comparison of the bleaching efficacy of different agents used for internal bleaching: a systematic review and meta-analysis. Journal of Endodontics, 2022.

RELATED CASES

post-orthodontic diastema closure restoration

Post-Orthodontic Diastema Closure with Direct Composite Restorations

Dr. Brunelli presents a conservative approach to post-orthodontic diastema closure, showing how a wax-up-guided silicone index and a single-shade composite can simplify direct restorations from canine to canine