Preserving pulp vitality is a primary objective of contemporary minimally invasive restorative dentistry, particularly in young patients presenting with deep carious lesions and symptoms of dentinal sensitivity.
In such clinical situations, indirect pulp capping represents a conservative approach aimed at maintaining pulp vitality while protecting the underlying pulp tissue from further biological and chemical irritation.
In this clinical case, Biodentine XP (Septodont, Saint-Maur-des-Fossés, France), a bioactive calcium silicate-based material, was selected as part of a bio-bulk-fill approach to preserve pulp vitality and protect the pulp-dentin complex. This strategy aimed to minimize the exposure of deep dentin to resin-based adhesive systems, particularly considering the patient’s young age and the preoperative sensitivity of the affected tooth.
However, the setting and maturation characteristics of Biodentine may represent a challenge when an immediate definitive adhesive restoration is required.
To overcome this clinical limitation, a restorative protocol involving Vertise Flow (Kerr, Orange, CA, USA), a self-adhesive flowable composite, was adopted to facilitate the placement of the definitive composite restoration in a single appointment.
This approach combines the biological benefits of indirect pulp capping with a simplified restorative workflow, aiming to preserve pulp vitality while achieving an immediate definitive restoration.

Fig.1
Initial clinical situation showing an existing composite restoration with marginal leakage and secondary caries affecting the maxillary right first molar.

Fig.2
Rubber dam placement to ensure adequate isolation of the operative field.

Fig.3
During removal of the existing restoration, the cavity was found to be particularly deep and extensive.

Fig.4
Therefore, a silicone index was fabricated to record the original height and morphology of the buccal cusps, facilitating their accurate reconstruction during the restorative procedure.

Fig.5
Initial removal of the existing restoration involved the buccal portion of the tooth, allowing better visualization and assessment of the extent of the carious lesion. Following preliminary cavity cleaning, a caries-detecting dye was applied to facilitate the identification of residual carious dentin and guide further excavation.

Fig.6
The final cavity preparation revealed an extensive and deep defect involving the buccal cusps. The underlying pulp horns were clearly visible through the thin layer of residual dentin, highlighting the close proximity of the cavity to the pulp tissue.

Fig.7
Considering the patient’s young age (21 years), the reported preoperative cold sensitivity, and the proximity of the cavity to the pulp tissue, indirect pulp capping was performed using Biodentine XP (Septodont, Saint-Maur-des-Fossés, France). The biomaterial was placed following a bio-bulk-fill approach, partially filling the deep cavity to protect the pulp–dentin complex and preserve pulp vitality.

Fig.8
Although some Biodentine XP (Septodont, Saint-Maur-des-Fossés, France) extended onto the buccal cavity margin, this area was subsequently covered with Vertise Flow (Kerr, Orange, CA, USA), a self-adhesive flowable composite, to seal the biomaterial and the adjacent margin.

Fig.9
The cavity was then refined using a rotary bur to remove excess material, expose clean tooth surfaces suitable for adhesive bonding, and create a smooth, uniform cavity configuration. This protocol allowed the definitive composite restoration to be completed during the same appointment, without waiting for complete maturation of Biodentine XP (Septodont, Saint-Maur-des-Fossés, France).

Fig.10
The entire cavity surface and margins were etched with phosphoric acid for 20 seconds to prepare the dental substrates for the subsequent adhesive procedure.

Fig.11
The silicone index fabricated before cavity preparation was used to reproduce the original morphology and height of the buccal cusps. The index was divided into two sections, retaining the buccal portion and discarding the palatal portion. An additional opening was created in the buccal index to allow direct access of the light-curing tip, ensuring unobstructed light transmission and adequate polymerization of the composite resin during cusp reconstruction.

Fig.12
Clinical view of the reconstructed buccal cusps following removal of the silicone index. Additional direct light curing is recommended without the silicone index to optimize light exposure and promote adequate polymerization of the composite resin.

Fig.13
Following reconstruction of the buccal cusps, the remaining Class I cavity was restored using the same body-shade composite resin, ensuring continuity between the reconstructed cusps and the occlusal restoration.

Fig.14
Following the Espresso Lines technique, the restoration was completed with the application of brown characterization stains to enhance the three-dimensional appearance of the occlusal anatomy and achieve a more natural aesthetic integration.

Fig.15
Following rubber dam removal, finishing and polishing procedures were performed to refine the restoration’s anatomy, smooth the surface, and achieve optimal marginal integration and surface gloss.

Fig.16
Initial aesthetic integration of the composite restoration with the surrounding tooth structure, including the buccal aspect. A follow-up appointment was scheduled at least 48 hours after treatment to reassess shade matching and aesthetic integration following tooth rehydration.

Fig.17
One-month follow-up periapical radiograph showing Biodentine XP (Septodont, Saint-Maur-des-Fossés, France) in close proximity to the pulp tissue, with the overlying composite restoration providing an adequate coronal seal and no radiographic evidence of periapical pathology. Clinically, the patient reported complete resolution of preoperative sensitivity and absence of spontaneous or provoked pain. Pulp sensibility testing revealed a positive response to cold stimulation, while percussion testing was negative, suggesting a favorable short-term clinical outcome and preservation of pulp vitality.
Conclusions
Preserving pulp vitality in young patients with deep carious lesions represents a fundamental goal of minimally invasive restorative dentistry. Indirect pulp capping with Biodentine XP (Septodont, Saint-Maur-des-Fossés, France) provides a biologically oriented approach to protecting the pulp-dentin complex while minimizing the application of resin-based adhesive systems in close proximity to the pulp.
The Bio-Bulk Fill approach allows Biodentine XP (Septodont, Saint-Maur-des-Fossés, France) to act as a bioactive dentin substitute, replacing a substantial portion of the missing dentin and reducing the volume of composite resin required.
The application of Vertise Flow (Kerr, Orange, CA, USA) as an intermediate layer offers a practical strategy to manage the interface between Biodentine XP (Septodont, Saint-Maur-des-Fossés, France) and the subsequent composite restoration, facilitating a single-visit restorative procedure without waiting for complete maturation of the biomaterial.
Combined with the Essential Lines technique for occlusal reconstruction, this protocol simplifies the restorative workflow while maintaining a conservative and biologically driven treatment philosophy.
The favorable clinical and radiographic findings at the one-month follow-up support the short-term feasibility of this approach, although longer-term clinical evaluation is necessary to confirm its predictability.
Bibliography
- Tosco V, Monterubbianesi R, Montagna P, Orilisi G, Vitiello F, Song H, et al. Vital pulp therapy: a three-year clinical case series on regenerative potential and adhesive restoration strategies. Regenesis Repair Rehabilitation. 2026;2(2):99-111.
- Tosco V, Monterubbianesi R, Puleio F, Orilisi G, Vitiello F, Putignano A and Orsini G (2026) Vital pulp therapy using Biodentine XP and adhesive restorations: a three-year case series. Front. Dent. Med. 7:1837786. doi: 10.3389/fdmed.2026.1837786.
- About I. Biodentine: from biochemical and bioactive properties to clinical applications. Giornale Italiano di Endodonzia, 2016, Volume 30, Issue 2, Pages 81-88, https://doi.org/10.1016/j.gien.2016.09.002.
- Manauta J, Salat A, Devoto W, Putignano A. Layers 2. Direct composite: the StyleItaliano clinical secrets. 2022. Quintessence pub.








