A Practical Guide to Monochromatic Cervical Restoration

Cervical restorations often pose challenges due to their location and the need for precise margin adaptation. However, with StyleItaliano’s recipes, achieving predictable, teachable, and repeatable results becomes accessible to everyone.

styleitaliano style italiano old cervical restoration

Fig.1
Intraoral picture of multiple old composite class V restorations.

styleitaliano style italiano cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.2
The patient presented with an incongruous cervical restoration on 23, characterized by inadequate margins, which required removal and replacement. Using the Gengiva instrument (LM-Finland), I gently displaced the gingiva to better visualize the lesion’s extent and evaluate the potential for isolation.

styleitaliano style italiano removing old composite with diamond bur cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.3
Using a dedicated chamfer bur from the UNO kit (Meisinger), I defined the apical margin of the restoration before placing the rubber dam. This step ensured a clear boundary for the new restoration and preserved the soft tissue level.

styleitaliano style italiano removing old composite with cylindrical bur cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.4
I removed the old composite material with a cylindrical round-ended bur (UNO – Meisinger).

styleitaliano style italiano multiblade bur removing thin composite layer cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.5
The dentin surface was refreshed using a low-speed round bur (UNO – Meisinger).

styleitaliano style italiano creating a long buccal bevel cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.6
A buccal bevel was created to improve the transition between the tooth and the restoration and to conceal the margin.

styleitaliano style italiano brown rubber polisher to polish margins cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.7
The margins were finished and polished using abrasive discs and a brown rubber polisher from the UNO kit.

styleitaliano style italiano air abrasion for clean cavity cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.8
The rubber dam was placed, and the gingiva was displaced using the LM Gengiva instrument to allow proper access to the cervical lesion. The tooth surface was sandblasted with 29-micron aluminum oxide using AquaCare while keeping the LM Gengiva in place.

styleitaliano style italiano selective enamel etching cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.9
The enamel was selectively etched for 30 seconds.

styleitaliano style italiano brushing adhesive onto cavity cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.10
Bond Universal was gently rubbed in for 20 seconds, carefully air-dried, and light-cured. As a universal bonding agent, it proved to be suitable for all types of restorations and etching strategies.

styleitaliano style italiano injecting flowable composite cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.11
Immediate Dentin Sealing (IDS) was performed using Flow.

styleitaliano style italiano fissura instrument removing bubbles from flowable cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.12
The material was accurately spread on the bottom of the cavity using Fissura (LM Black Edition), ensuring bubble-free application.

styleitaliano style italiano applying packable composite cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.13
According to Jordi Manauta’s “Closing Gap Technique,” I applied the first layer of composite (packable consistency), starting coronally and progressing apically. By keeping the modeling instrument in constant contact with the tooth, I minimized gross excesses that could be annoying and difficult to remove during the finishing procedures.

styleitaliano style italiano composite stratification starting coronally cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.14
A second layer of packable composite was placed without filling the entire cavity, leaving a small gap between the composite and the natural tooth.

styleitaliano style italiano filling cervical gap with composite cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.15
The marginal gap was sealed with the same flowable composite used for Immediate Dentin Sealing. Its flowable consistency ensured seamless transitions between the packable Venus Pearl and the natural tooth, preventing visible defects and enhancing aesthetics.

styleitaliano style italiano class V restoration before finishing and polishing cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.16
As evident upon lifting the rubber dam, the restoration maintained the gingival level and avoided uncontrolled invasion of the gingival margin.

styleitaliano style italiano finishing of composite cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.17
Using a low-speed diamond bur (UNO – Meisinger), I finished the restoration by creating texture according to Kuwata’s three planes.

styleitaliano style italiano polishing composite with brown rubber cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.18
Overlapping composite was removed, and polishing was carried out, starting with the brown rubber.

styleitaliano style italiano kulzer supra rubbers for composite polishing cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.19
Polishing and glossing were performed. They were applied at 7,500 rpm (optimum) under air-water spray cooling to prevent overheating of the restoration and the underlying tooth.

styleitaliano style italiano finishing and polishing cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.20
The final outcome after finishing and bonding procedures showed that the restoration was well integrated, first in terms of shape and then in color, despite the treated tooth requiring rehydration.

styleitaliano style italiano restoration after rubber dam removal cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.21
Aspect after rubber dam removal.

styleitaliano style italiano restorations at 3-month check-up cervical restoration class V closing gap techique Kulzer Venus Pearl Pure direct composite restoration

Fig.22
At the 3-month check-up, the cervical restoration demonstrated proper integration in terms of aesthetics. This was made possible by a simplified shade system, in most cases, allows for effortless execution of anterior restorations using monochromatic layering.

Conclusions

This protocol demonstrates an efficient and predictable approach to cervical restorations. By utilizing specific tools such as the Meisinger UNO kit, LM Gengiva, and composites in both flowable and packable consistencies, and by adhering to well-established clinical techniques, it is possible to achieve outcomes that are not only aesthetic but also long-lasting.

The choice of an effective monochromatic layering approach is crucial, as it enables the execution of a monochromatic restoration with the proper shape, texture, and color, leaving no room for error while allowing for a streamlined procedure. Ultimately, the fewer the steps, the lower the risk of mistakes. Composite is easy to apply due to its excellent handling properties, and with only four shades, color matching becomes highly efficient, significantly reducing chair time.

Bibliography

  1. Manauta J, Salat A, Devoto W, Putignano A. LAYERS 2 Direct Composites: The StyleItaliano Clinical Secrets. 2022, Quintessence Publishing.
  2. Kubo S, Yokota H, Yokota H, Hayashi Y. Three-year clinical evaluation of a flowable and a hybrid resin composite in non-carious cervical lesions. J Dent. 2010 Mar;38(3):191-200.
  3. Lührs AK, Jacker-Guhr S, Günay H, Herrmann P. Composite restorations placed in non-carious cervical lesions—Which cavity preparation is clinically reliable? Clin Exp Dent Res. 2020 Oct;6(5):558-567.
  4. Chiodera G. 5th Class in Business Class. 2017, www.styleitaliano.org
Previous article
Next article

RELATED CASES

post-orthodontic diastema closure restoration

Post-Orthodontic Diastema Closure with Direct Composite Restorations

Dr. Brunelli presents a conservative approach to post-orthodontic diastema closure, showing how a wax-up-guided silicone index and a single-shade composite can simplify direct restorations from canine to canine